The Resource Characterization of minerals, metals, and materials : proceedings of symposium, sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals, and Materials Society) ; edited by Jiann-Yang Hwang [and others]

Characterization of minerals, metals, and materials : proceedings of symposium, sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals, and Materials Society) ; edited by Jiann-Yang Hwang [and others]

Characterization of minerals, metals, and materials : proceedings of symposium
Characterization of minerals, metals, and materials
Title remainder
proceedings of symposium
Statement of responsibility
sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals, and Materials Society) ; edited by Jiann-Yang Hwang [and others]
Cataloging source
Dewey number
index present
LC call number
LC item number
.C49 2012
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
Characterization of minerals, metals, and materials : proceedings of symposium, sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals, and Materials Society) ; edited by Jiann-Yang Hwang [and others]
Antecedent source
Bibliography note
Includes bibliographical references and indexes
  • net
Carrier category
online resource
Carrier category code
Carrier MARC source
Content category
Content type code
Content type MARC source
  • Front Matter -- Characterization of Ferrous Metals I. Characterization of the Microstructure of Compacted Graphite Cast Iron / Vahid Rastegar -- EBSD Analysis of Complex Microstructures of CSP Processed Low Carbon Micro-Alloyed Steels / Carl-Peter Reip, Reinhard Flender, Matthias Frommert -- Empirical Models of Cold Working Effect in Steel Tube Production / Robert G Batson, Jing Zhang -- Microstructural Investigation of Carbon Steel after Hot Rolling to Optimize Complex Hot Forming of Thick Plates / Gerhard Tober, Okechukwu Anopuo, Petra Maier -- Microstructural Characterization of Fe-Mn-C Ternary Alloy under Near-Rapid Solidification / Wenbin Xia, Rong Yang, Changjiang Song, Qijie Zhai -- Effects of Surface Modifications on SCW Corrosion Resistance / Jian Li, S Penttil,̄ W Zheng -- Interface Mass Transfer during the Tribofinishing Process / I Hilerio, DY Medina, V J Corť, JD Muo̜z -- Characterization of Non-Ferrous Materials. Improvement of Mechanical Properties in Severely Plastically Deformed Ni-Cr Alloy / KH Song, HT Son, HS Kim, WY Kim -- Processing and Microstructural Control of Copper Foams for Thermal Wick Material Systems / Keri Ledford, Stephanie Lin, Jason Nadler -- Characterization of Minerals and Ceramics. A Novel Low-Energy Route for the Extraction of Copper and Cobalt Metals/Alloys from the Zambian Sulphide Concentrates / Yotamu Stephen, Rainford Hara, Animesh Jha -- Structural and Chemical Modification of Sulfide Mineral Surfaces by High-Power Nanosecond Pulses / Igor Zh Bunin, Valentine A Chanturiya, Alexey T Kovalev, Irina A Khabarova, Elizaveta V Koporulina -- Characterization of Magnetic and Non-Magnetic Iron Oxide Nanoparticles Synthesized by Different Routes / Alyssa A Maich, E Yegan Erdem, Fiona M Doyle -- Characterization of Concentrate, Pellet and DRI Samples for Trace Elements / Mingming Zhang -- The Dielectric and the Temperature-rising Characteristics of Ore Fines Materials in Microwave Field / Hongbo Zhu, Linqing Dai, Jinhui Peng, Qianxu Ye, Jian Chen, Wei Liang, Zheng Wei, Zhenliang Weng -- Characterization on the Roughness of the Iron Ore Particles / Xuewei Lv, Xiaobo Huang, Rende Zhang, Maojun Zhou -- Synthesis and Characterization of Al, Ag, Ti, Cu, and B Substituted Hydroxylapatite / Celaletdin Ergun, Thomas J Webster, Gurbuz Gunes, Abdurrahman Bahadir, Huinan Liu, Ibrahim Erden -- Electric Resistivity of Fine Chromite Ore / Cheng Pan, Xuewei Lv, Chenguang Bai, Xuyang Liu, Donghai Li -- Melting and Reduction of Manganese Sinter with Fluxes / Thomas Brynjulfsen, Merete Tangstad -- Ceramic Pigments with Spinel Structure Obtained by Low Temperature Methods / E A Chavarriaga, L J Jaramillo, OJ Restrepo -- Mechanical Characterization of Cellular Ceramic Materials / Wilson Aechar, Fernando Barcelos, Luis Carlos Pereira -- Study of Attapulgite for Human Health / Wilson Aechar, Antonio Carlos Silva da Costa, Tulio Flv̀io Accioly de Lima e Moura, Ledjane Barreto -- Characterization Technologies. 3D Metallography of Multiphase Steels / Martin Fischer, Pierre Lutomski, Andreas Stieben, Wolfgang Bleck -- Characterization of Open-Pored Metals Using Image Processing / Bjr̲n Hinze, Joachim R̲sier -- Thermography Assisted Fatigue Testing / Anil Saigal, Rongbiao Gu, Christopher San Marchi, Douglas M Matson -- Characterization of Environmental and Construction Materials. Tile Production Using Wastes from Mining Industry of the Mining District Pachuca and Real Del Monte / Juan Herǹndez A, Eleazar Salinas R, Francisco Patio̜ C, Isauro Rivera L, Javier Flores B, Norma Trp̀ala P, Miguel Přez L, Mizraim U, Flores G, Ivǹ A, Reyes D -- Concrete with Cementitious Steel Slag Composites and Its Applications / Honghui Fang, Jiannyang Hwang, Gaifeng Xue, Lijun Lu -- Characterization of Dust Generated in the BOF Converter / Eduardo Junca, Još Roberto de Oliveira, Denise Crocce Romano Espinosa, Jorge Alberto, Soares Tenr̤io -- Experimental Research to Improve the Soundness of Cementitious Material Blended with Cycled Fluidized Bed Ash / Shujing Zhu, Xinghua He -- Production of Apatitic Material Using Turkish Colemanite Mineral / Cagatay Moral, Tugba Basargan, Gulhayat Nasun-Saygih -- Setting Time of Concrete Material; Laboratory Measurements Versus Field Applications / Mourad Y Riad, Samir N Shoukry, Gergis W William -- Gas Emission and Structural Changes in the Firing of Red Clay Ceramics with Addition of Sanitary Ware Mass Wastes / Faria R T, Souza V P, Cosin S, Toledo R, Vargas, H -- Characterization of Energy, Electronic and Optical Materials. Influence of LaO Additive Content on the Phase Stability, Sintering and Microstructure of 8 MOL% YO Stabilized Cubic Zirconia (8YSZ) Ceramic Used for Solid Oxide Fuel Cell Applications / Suleyman Tekeli, Bulent Aktas, Serdar Salman -- Development and Characterization of Carbonaceous Materials Incorporated with Metal (Ti, V and Zn) -Organic Compounds for Hydrogen Storage / Mala Nath, Asheesh Kumar, Arjit Mallick -- Characterization of Nickel Oxide Nanoparticles for Hydrogen Adsorption with External Electric Field / Zheng Zhang, Xiang Sun, Zhiwei Peng, Jiann-Yang Hwang -- Nanocrystalline CdS Thin Films Prepared by Vacuum Evaporation / Shadia J Ikhmayies -- Structure-Property Correlation of xPb(NiNb)OPb(ZrTi)O Based Relaxor-Ferroelectric Ceramics Synthesized Via Columbite Precursor Method / B Mallesham, T V Jayaraman, AR James, D Das -- The Characteristics of Optical Recording Media Affected by the Accelerating Aging Test / Der-Ray Huang, Jing-Xuan Lin, Tzu-Chien Lin, Jiin-Sen Chen, Ming-Yu Lin, Jack Tsai -- A Comparison between the Properties of Spray-Pyrolyzed SnO:F/CdS: In Structures Prepared by Using NHF and HF as a Source of Fluorine / Shadia J Ikhmayies, Riyad N Ahmad-Bitar -- Characterization and Preparation of Anti-Reflection Coatings in the RANGE of 3-5 æm for Si Optical Window / K Iqbal, A Maqsood, M Mujahid, M H Asghar -- Characterization of Carbon and Soft Materials. Thermal Properties of Polyester Composites Incorporated with Coir Fiber / Helvio Pessanha Guimarẽs Santaf,̌ Nũ Simonassi, Sergio Neves Monteiro -- Investigating the Rheology of LCPs through Different Die Geometries / Arash Ahmadzadegan, Michael A Zimmerman, Anil Saigal -- Effect of the Fiber Equivalent Diameter on the Elastic Modulus and Density of Sisal Fibers / Artur Camposo Pereira, Wellington Pereira Iǹcio, Frederico Muylaert Margem, Sergio Neves Monteiro -- Correlation between the Density and the Diameter of Buriti Fibers / Anderson de Paula Barbosa, Michel Picando Oliveira, Alexandre da Silva Crespo, {uFE22}bia Suely Silva Santos -- Thermal and Morphological Behavior of EVOH/Piassava Fiber Composites / Beatriz Ribeiro Nogueira, Anne Chinellato, Angel Visentim Ortiz, Arifa Parveen, Vijaya Kumar Rangari, Esperidiana A B Moura -- Thermal Behavior of Banana Fiber / Frederico Muylaert Margem, Lucas Barbosa de Souza Martins, Nathalia Carneiro Garcia Rosa, Sergio Neves Monteiro -- Comparative Studies of Crushing Behavior of Various Fiber Reinforced Skin Polyurethane Foam Cored Composite Sandwich Structures / K V Sharma, M Sripathy -- Elastic Modulus Variation with Diameter for Ramie Fibers / Alice Barreto Bevitori, Isabela Lêo Amaral da Silva, Renan Sopeletto Carreiro, Frederico Muylaert Margem, Sergio Neves Monteiro -- Comparative Study of the Sugarcane Bagasse Fiber/HDPE Composite Properties Using Electron-Beam and Gamma Radiation Treatments / Amanda C S Pereira, Anne C Chinellato, Alejandra T Soria, Anibal V Abreu, Ňlida L de Mastro, Esperidiana A B Moura -- Characterization of Light Metals
  • Influence of Deformation on the Properties of Carbon-Fiber Reinforced 2024 Alloy Matrix Composites / Linli Wu, Guangchun Yao -- Microstructure and Deformation Behavior of Mg-Zn-Al-Re Magnesium Alloy / Jing Zhang, Fusheng Pan, Chenguang Bai -- Microstructures and Tensile Mechanical Properties of Mg-9Zn-0.6Zr-2Er Magnesium Alloy / Jing Zhang, Baoxiang Zhang -- Nanobond -- The Perfect Refractory Choice for Quick Lining and Repairing of Aluminium Melting Furnaces / Thomas Schemmel, Helge Jansen, Bertram Kesselheim, Uwe Kremer -- Characterization of Grit Blasted Metallic Biomaterials by Thermoelectric Power Measurements / H Carreon, S Barriuso, JL Gonzl̀ez-Carrasco, F G Caballero, ML Lieblich -- Characterization of the Torsional Response of As-cast A359-SiCp-30% at Elevated Temperatures / James DeMarco, Justin Karl, Yongho Sohn, Ali Gordon -- Characterization of Ferrous Metals II. Comparison of Creep Life Assessment between Tin-Based Lead-Free Solders and Lead Solders / Kenji Monden -- Correlationship between JC and Equivalent Fracture Strain Determined by Small-Punch Test in JN1, JJ1 and JK2 Austenitic Stainless Steels / Maribel L Saucedo-Muo̜z, Toshiyuki Hashida, Victor M Lopez-Hirata1 -- Effect of Heat Treatment on the Surface Characteristics of AISI D2 Steel Machined by Wire EDM / M M Dhobe, 1 K Chopde, CL Gogte -- Hot Deformation Study by Processing Maps of N Containing Microalloyed Steel / M Dikovits, C Poletti, F Warchomicka, GP Chaudhari, V Pancholi -- Influence of Annealing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Sheet of Fe-36Ni Invar Alloy / Xiang Jiang, Lijuan Li, Xin Xia, Junjun Huang, Qijie Zhai -- Mechanical Properties of Friction Stir Welded Inconel 600/SS 400 Lap Joints / KH Song, WY Kim, K Nakata
Control code
1 online resource (xviii, 533 pages)
File format
Form of item
Level of compression
Media category
Media MARC source
Media type code
Other physical details
Quality assurance targets
not applicable
Reformatting quality
unknown sound
Specific material designation
System control number
  • (OCoLC)795914207
  • pebcs1118371291

Library Locations

    • Deakin University Library - Geelong Waurn Ponds CampusBorrow it
      75 Pigdons Road, Waurn Ponds, Victoria, 3216, AU
      -38.195656 144.304955
Processing Feedback ...